LiPo Batteries

Cell count, C-rating for the solenoid pulse, protection, charging, runtime and safety inside a gun shell.

Firearms

LiPo Batteries · Deep Dive

LiPo Batteries

A battery that can hit as hard as a wall supply.

Cell count, C-rating for the solenoid pulse, protection, charging, runtime and safety inside a gun shell.

Photo: GNB (Gaoneng) 6S 450 mAh 80C long-type LiPo pack with XT30 and balance leads by RaceDayQuads (product image)

Search every volume:

?

How to search

sten gun
pages with both words
"sten gun"
the words together, as a phrase
sten OR sterling
either one (| works too)
sten -replica
leave out pages that mention “replica”

Without quotes, the last word also matches longer words that start with it (sten finds Stenophylla), and close word forms count (rifle finds rifles). Tick Exact words to match whole words only.

Whole deep dives are listed first, then the pages inside them.

    Volumes

    1. Vol 1 Why a Battery, and Which Chemistry What a pack changes in a recoil light gun, and the four chemistries a builder can choose from: LiPo pouch, Li-ion cylinder, LiFePO4 and NiMH, with the numbers from their own datasheets
    2. Vol 2 Cell Count Against the 24 V-Class Rail Does a 6S pack sit inside 18 to 28 V? 5S, 6S and 7S LiPo, LiHV, 6S Li-ion, 7S and 8S LiFePO4, and the case for a smaller pack behind a boost converter
    3. Vol 3 Current, C Rating, Sag and Runtime — the Worked Numbers What the regulated solenoid stage actually takes from a pack, why the C rating on the label does not matter here, how far a healthy pack sags, and how many hours of play a 450 mAh 6S pack holds
    4. Vol 4 Protection — Fuse, Pack Protector, Rail Switch and Temperature A hobby pack has none of its own. What sits between a 6S pack and the 24 V rail, what each part answers, and which parts: a DC fuse, two stacked BQ77905 protectors, an LM5060 soft-start switch, a thermistor and a fuel gauge that does not drain the pack on the shelf
    5. Vol 5 Charging — On the Bench, Through the Gun, and Over USB-C Why neither the 24 V brick nor a 20 V PD charger can top up a 6S pack directly, the bench balance charger that runs from the same brick, charging through a port in the gun, and what a real on-board USB-C PD charger takes
    6. Vol 6 A Pack Inside a Printed Gun — Safety, Heat, Storage, and Where It Fits in the MP7 How lithium packs fail and what a PETG shell does to each failure: swelling, puncture, heat from the solenoid, venting, fusing and storage; then the candidate places for a pack in the printed MP7, the magazine first, and the measurement that decides it
    7. Vol 7 The Picks, the Bench Tests, and Shipping Packs in a Kit Which pack, charger and protection parts to buy and why, with dated prices; nine bench tests on the ADP3450 and the programmable supplies that replace this dive's estimates; and what UN 38.3, the 2026 IATA state-of-charge rule, 49 CFR 173.185 and USPS mean for a kit