Manual / Guide · 2004

Sega Ghost Squad — Owner's Manual

Owner's manual for the Ghost Squad cabinet: the solenoid 'gun reaction', burn warning and photos of the gun controller.

Author: Sega
Year: 2004
Type: Manual / Guide
Credit: Sega. A ManualsLib capture uploaded to the Internet Archive (item 'sega-ghost-squad')

ghost squad
arcade
solenoid
gun reaction

Manualslib.com - The Global Manuals Library Manuals / Brands / Sega Manuals / Arcade Game Machines / Ghost Squad / Owner's manual / PDF SEGA GHOST SQUAD ARCADE GAME MACHINE OWNER'S MANUAL Quick Links Name of Parts Assembly and Installation Control Unit (Gun Controller) Troubleshooting Game Board Design Related Parts Table of Contents Table of contents Specifications INTRODUCTION OF THE OWNERS MANUAL Handling precautions Precautions concerning installation location Operation area Electric current consumption Operation Name of parts Accessories How to use the chihiro board carton box Instructions How to use the carton box (gd-rom drive) Assembly and installation Assembling the billboard Assembling the ptv Assembling the cabinet Securing in place (adjuster tuning) Attaching the fluorescent lights and lamps Fluorescent Light Halogen Lamp Installing the gd-rom drive (setting the gd-rom disc) Power supply and earth connection Turning the power on Assembly check Memory test C.r.t. test Input test Output test Gun adjustment Interference Prevention Wiring Precautions when moving the machine Cautions When Transporting the Machine Game description Game outline Game controls Characters Alpha Unit Fellow M.O.P. Members Game flow and on-screen display Card Insertion Screen Player Information Display Screen Customize Screen Name Entry Screen Gun Controller Explanation Screen Gun Controller Calibration Screen Mission Select Screen In-game Display Mission Results Screen Game Results Game rules and gameplay Life Continue and Game Over GS Meter E-Marker Tactic Selection Events (Special Operations) Auxiliary Items Experience Points Rank and Promotion Costumes Weapons Mid-game Entry Mid-game Termination Card Recovery Number of Uses Ic cards Explanation of test and data display Switch unit and coin meter System test mode System test menu mode Media board test System information Jvs test INPUT TEST Screen Sound test SIZE CHECK Screen F. c.r.t. test COLOUR CHECK Screen Coin assignments Common Individual DETAIL SETTING Screen Coin chute multiplier Bonus adder Coin to credit Game cost setting Clock setting Network setting Ip address (c) Subnet mask (c) Gate way (c) Network setting (media) Game test mode Game assignments Card read/write test Close setting Bookkeeping Backup data clear CONTROL UNIT (GUN CONTROLLER) Replacing the microswitch Replacing the sensor unit Replacing the solenoid Ic card unit How to clean the ic card unit Fixing jammed cards Cleaning the screen Projector Remote control buttons Setting the interface Projector adjustment Automatic color matching Adjusting the on-screen contrast Adjusting the screen brightness Adjusting the on-screen display position Adjusting the screen size Convergence adjustment Manual color matching Static convergence adjustment Line convergence adjustment Coin insertion test Handling the coin jam Cleaning the coin selector Coin selector Billboard Internal Fluorescent Light Replacing the fluorescent lights and lamps Instruction Panel Internal Fluorescent Light Periodic inspection table Periodic inspection Cleaning the cabinet surfaces Circuit protector Problems not involving the game board Troubleshooting Replacing the led bd Replacing the fuse Error codes Removing the game board Game board Removing the gd-rom drive Composition of the game board Assy case box ctf exp(843-0012d-02) Dip sw setting Replacing the main board battery Replacing the media board battery pack Design related parts WIRE COLOR CODE TABLE Top assy ctf dx Assy ptv (ctf-0500) Ptv w/sticker ctf (ctf-0510) ASSY BILLBOARD DX (CTF-0500) Assy front panel (ctf-0600) ASSY PTV BASE (CTF-0650) ASSY SUB PTV BASE (CTF-0660) ASSY SUB PTV BASE (CTF-0670) ASSY MASK (SPY-0530) Assy cabinet dx (ctf-1000) Assy sub cabi dx (ctf-1100) Sw unit (ctf-1160) Assy latch (ctf-1170) Fan unit (str-1070) Meter unit single yl (610-0549-03) IC RW UNIT (CTF-1150) Assy speaker pipe (ctf-1200) Assy controller holder (ctf-1300) Assy controller holder (ctf-1320) Assy holder light (ctf-1340) Assy control panel (ctf-2000) Control unit (ctf-2100) Sensor unit (jpt-2030) Assy main bd (ctf-4200) Assy elec (ctf-4100) Assy xfmr 100v area (ctf-4200) Assy xfmr 200v area (ctf-4300) Wire color code table Other ManualsLib Projects www.sauservice.com 1ST PRINTING NOVEMBER ‘04 ® Deluxe Version Owner’s Manual SEGA AMUSEMENTS USA, INC. MANUAL NO. 4201-6831-01 GAME CODE: CTF Downloaded from www.Manualslib.com manuals search engine BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety: To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufﬁciently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary. Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the contents of the displays before reading the text. WARNING! Indicates that mishandling the product by disregarding this warning will cause a potentially hazardous situation which can result in death or serious injury. CAUTION! Indicates that mishandling the product by disregarding this caution will cause a slight hazardous situation which can result in personal injury and or material damage. For the safe usage of the product, the following pictographs are used: Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this display is attached to places where the Owner’s Manual and or Service Manual should be referred to. Perform work in accordance with the instructions herein stated. Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work. Be sure to turn off power before working on the machine. To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect. Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is ﬁrmly connected to the Control equipment. Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a ﬁre when earth leakage occurs. Be sure to use fuses which meet the speciﬁed rating. (only for the machines which use fuses). Using fuses exceeding the speciﬁed rating can cause a ﬁre and electric shock. Downloaded from www.Manualslib.com manuals search engine Speciﬁcation changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the ofﬁce herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the speciﬁcations not designated by SEGA. Ensure that the product meets the requirements of appropriate Electrical Speciﬁcations. Before installing the product, check for Electrical Speciﬁcations. SEGA products have a nameplate on which Electrical Speciﬁcations are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Speciﬁcations different from the designated Speciﬁcations can cause a ﬁre and electric shock. Install and operate the product in places where appropriate lighting is available, allowing warning labels to be clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufﬁcient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the ofﬁce herein stated. When handling the Monitor, be very careful. (Applies only to the product w/monitor.) Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise. Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.) Do not operate the product leaving on-screen ﬂickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers. When transporting or reselling this product, be sure to attach this manual to the product. In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the speciﬁc Instruction Manual of such equipment. • Descriptions herein contained may be subject to improvement changes without notice. • The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA. INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION. Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. Do power cords have cuts and dents? Do the fuses used meet speciﬁed rating? Is the Circuit Protector in an energized status? Are all accessories available? Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be ﬁrmly closed? Downloaded from www.Manualslib.com manuals search engine TABLE OF CONTENTS BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS INTRODUCTION OF THE OWNER’S MANUAL 1. HANDLING PRECAUTIONS .......................................................................................... 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ................................... 3. OPERATION ..................................................................................................................... 4. NAME OF PARTS ............................................................................................................ 5. ACCESSORIES ................................................................................................................. 6. ASSEMBLY AND INSTALLATION ................................................................................ 7. PRECAUTIONS WHEN MOVING THE MACHINE ..................................................... 8. GAME DESCRIPTION ..................................................................................................... 9. EXPLANATION OF TEST AND DATA DISPLAY ......................................................... 10. CONTROL UNIT (GUN CONTROLLER) ....................................................................... 11. 1C CARD UNIT ................................................................................................................. 12. PROJECTOR ...................................................................................................................... 13. COIN SELECTOR ............................................................................................................. 14. REPLACING THE FLUORESCENT LIGHTS AND LAMPS ....................................... 15. PERIODIC INSPECTION ................................................................................................. 16. TROUBLESHOOTING ..................................................................................................... 17. GAME BOARD ................................................................................................................. 18. DESIGN RELATED PARTS ............................................................................................... 19. PARTS **MISSING** ........................................................................................................ 20. WIRE COLOR CODE TABLE ........................................................................................... 21. WIRING DIAGRAMS ........................................................................................................ Downloaded from www.Manualslib.com manuals search engine 1 - 2 3 - 4 5 - 8 9 10 - 15 16 - 42 43 - 45 46 - 62 63 - 88 89 - 95 96 - 102 103- 112 113 114- 117 118- 119 120- 128 129- 138 139 140 XXX Installation Space Height Width Length Weight Power, maximum current MONITOR SPECIFICATIONS : 47.2 inches width X 66.1 inches : 87.8 inches : 47.2 inches : 58.1 inches : 557.8 lbs : 590 W 6.31 A (AC 120V 60 Hz AREA) : 50 Type Projection Display INTRODUCTION OF THE OWNERS MANUAL This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product, SEGA GHOST SQUAD DELUXE TYPE. This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufﬁciently understanding the instructions. If the product fails to function satisfactorily, non-technical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from. Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual. STOP Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning. IMPORTANT! SEGA AMUSEMENTS USA, INC. / CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone : (415) 701-6580 Fax : (415) 701-6594 ◆ PRODUCTION DATE ◆ This SEGA product was produced in the year of: 2004 This signiﬁes that this work was disclosed in 2004. Downloaded from www.Manualslib.com manuals search engine DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN WARNING! Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock. Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge. The location's maintenance man and serviceman are herein deﬁned as follows: "Location's Maintenance Man" : Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product. Activities of Location's Maintenance Man : Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc. Serviceman : Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment. Serviceman's Activities : Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines. �� Downloaded from www.Manualslib.com manuals search engine Notes: Downloaded from www.Manualslib.com manuals search engine 1. HANDLING PRECAUTIONS When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine. WARNING! ● Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case work should be performed in the status of power on, this manual always states to that effect. ● To avoid electric shock or short circuit, do not plug in or unplug quickly. ● To avoid electric shock, do not plug in or unplug with a wet hand. ● Do not expose Power Cords and Earth Wires on the surface, (ﬂoor, passage, etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit. ● To avoid causing a ﬁre or electric shock, do not put things on or damage Power Cords. ● When or after installing the product, do not unnecessarily pull the power cord. If damaged, the power cord can cause a ﬁre or electric shock. ● In case the power cord is damaged, ask for replacement through where the product was purchased from or the ofﬁce herein stated. Using the cord as is damaged can cause ﬁre, electric shock or leakage. ● Be sure to perform grounding appropriately. Inappropriate grounding can cause an electric shock. ● Be sure to use fuses meeting speciﬁed rating. Using fuses exceeding the speciﬁed rating can cause a ﬁre or electric shock. ● Completely make connector connections for IC BD and others. Insufﬁcient insertion can cause an electric shock. ● Speciﬁcation changes, removal of equipment, conversion and/or addition, not designated by SEGA are not permitted. • Failure to observe this may cause a ﬁre or an electric shock. Non-compliance with this instruction can have a bad inﬂuence upon physical conditions of the players or the lookers-on, or result in injury during play. • SEGA shall not be held responsible for damage, compensation for damage to a third party, caused by speciﬁcation changes not designated by SEGA. ● Be sure to perform periodic maintenance inspections herein stated. Downloaded from www.Manualslib.com manuals search engine A www.sauservice.com STOP IMPORTANT! ● For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard. ● The Projector is employed for this machine. The Projector's screen is susceptible to damage, therefore, be very careful when cleaning the screen. For details, refer to PROJECTOR. ● Some parts are the ones designed and manufactured not speciﬁcally for this game machine. The manufacturers may discontinue, or change the speciﬁcations of, such general-purpose parts. If this is the case, Sega cannot repair or replace a failed game machine whether or not a warranty period has expired. www.sauservice.com Downloaded from www.Manualslib.com manuals search engine A 2. PRECAUTIONS CONCERNING INSTALLATION LOCATION WARNING! This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a ﬁre, electric shock, injury and or malfunctioning. ● Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. ● Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units, etc. ● Places ﬁlled with inﬂammable gas or vicinity of highly inﬂammable/volatile chemicals or hazardous matter. ● Dusty places. ● Sloped surfaces. ● Places subject to any type of violent impact. ● Vicinity of anti-disaster facilities such as ﬁre exits and ﬁre extinguishers. ● The operating (ambient) temperature range is from 5˚ to 30˚. LIMITATIONS OF USAGE REQUIREMENTS WARNING! ● Be sure to check the Electrical Speciﬁcations. Ensure that this product is compatible with the location's power supply, voltage and frequency requirements. A plate describing Electrical Speciﬁcations is attached to the product. Non-compliance with the Electrical Speciﬁcations can cause a ﬁre and electric shock. ● This product requires the Breaker and Earth Mechanisms as part of the location facilities. Using them in a manner not independent can cause a ﬁre and electric shock. ● Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC single phase 100~120 V area). Non-compliance with the Electrical Speciﬁcations can cause a ﬁre and electric shock. ● Be sure to independently use the power supply equipped with the Earth Leakage Breaker. Using a power supply without the Earth Leakage Breaker can cause an outbreak of ﬁre when earth leakage occurs. ● Putting many loads on one electrical outlet can cause generation of heat and a ﬁre resulting from overload. ● When using an extension cord, ensure that the cord is rated at 15 A or higher (AC 100~120 V area). Using a cord rated lower than the speciﬁed rating can cause a ﬁre and electric shock. Downloaded from www.Manualslib.com manuals search engine 3 www.sauservice.com OPERATION AREA WARNING! STOP IMPORTANT! ● For the operation of this machine, secure a minimum area of 2.3 m (7.5 ft) (W)×2.8 m (9.2 ft) (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. ● Be sure to provide sufﬁcient space so as to allow this product's ventilation fan to function efﬁciently. To avoid machine malfunctioning and a ﬁre, do not place any obstacles near the ventilation opening. ● SEGA shall not be held responsible for damage, compensation for damage to a third party, resulting from the failure to observe this instruction. For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 1 m (W) and 1.7 m (H). Electric current consumption 150mm (5.9in) 2.8m (9.2ft) MAX. 6.31 A (AC 120 V, 60 Hz) MAX. 3.41 A (AC 220 V, 50 Hz) MAX. 3.28 A (AC 220 V, 60 Hz) MAX. 3.22 A (AC 240 V, 50 Hz) MAX. 6.6 A (AC 110V, 60Hz; TAIWAN) 2.3m (7.5ft) FIG. 2 www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 4 3. OPERATION PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. In order to avoid accidents, check the following before starting the operation: ● To ensure maximum safety for the players and the customers, ensure that where the product is operated has sufﬁcient lighting to allow any warnings to be read. Operation under insufﬁcient lighting can cause bodily contact with each other, hitting accident, and or trouble between customers. ● Be sure to perform appropriate adjustment of the monitor (projector). For operation of this machine, do not leave monitor's ﬂickering or deviation as is. Failure to observe this can have a bad inﬂuence upon the players' or the customers' physical conditions. ● It is suggested to ensure a space allowing the players who feel sick while playing the game to take a rest. ● Check if all of the adjusters are in contact with the surface. If they are not, the Cabinet can move and cause an accident. Approx. 5mm WARNING! Ensure that all of the Adjusters are in contact with the floor. FIG. 3 Downloaded from www.Manualslib.com manuals search engine 5 www.sauservice.com WARNING! CAUTION! STOP IMPORTANT! ● Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. ● Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step. ● To avoid electric shock, check to see if door & cover parts are damaged or omitted. ● To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product. Flower vases, ﬂowerpots, cups, water tanks, cosmetics, and receptacles/containers/ vessels containing chemicals and water. ● To avoid injury, be sure to provide sufﬁcient space by considering the potentially crowded situation at the installation location. Insufﬁcient installation space can cause making bodily contact with each other, hitting accidents, and or trouble between customers. ● During daily cleaning and maintenance, check the surface of the control unit (Gun Controller) for cracks and other damage and ensure that screws are securely fastened. Loose screws, cracks, and other damage could cause harm to players and other customers if left unrepaired. Players with bare hands directly hold the controller. For operation, it is recommended that the wet towels (paper towels) be provided. www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 6 PRECAUTIONS TO BE HEEDED DURING OPERATION(PAYING ATTENTION TO CUSTOMERS) To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. WARNING! ● To avoid injury and accidents, those who fall under the following categories are not allowed to play the game. • Those who need assistance such as the use of an apparatus when walking. • Those who have high blood pressure or a heart problem. • Those who have experienced muscle convulsion or loss of consciousness when playing video game, etc. • Those who have a trouble in the neck and or spinal cord. • Intoxicated persons. • Pregnant women or those who are in the likelihood of pregnancy. • Persons susceptible to motion sickness. • Persons whose act runs counter to the product's warning displays. ● A player who has never been adversely affected by light stimulus might experience dizziness or headache depending on his physical condition when playing the game. Especially, small children can be subject to those conditions. Caution guardians of small children to keep watch on their children during play. ● Instruct those who feel sick during play to have a medical examination. ● To avoid injury resulting from falling down and electric shock due to spilled drinks, instruct the player not to place heavy items or drinks on the product. ● To avoid electric shock and short circuit, do not allow customers to put hands and ﬁngers or extraneous matter in the openings of the product or small openings in or around the doors. ● To avoid falling down and injury resulting from falling down, immediately stop the customer's leaning against or climbing on the product, etc. ● To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justiﬁable reason. CAUTION! ● Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down. ● Playing close to the cabinet could cause the Gun Controller to strike the cabinet, possibly causing an accident. Be sure to ask your customers to maintain a safe distance during play. ● Wearing large rings and other accessories during play could result in injury to players' ﬁngers. Be sure to ask your customers to remove such accessories before playing. Downloaded from www.Manualslib.com manuals search engine 7 www.sauservice.com STOP IMPORTANT! ● The Gun Controller for use on 1P side (left side) and 2P side (right side) are different. Ensure that players do not confuse the right and left side guns when starting play. ● Make sure to avoid disturbing customers when moving/removing the machine from its current location. www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 8 4. NAME OF PARTS BILLBOARD PTV . 50 TYPE PROJECTION DISPLAY IC CARD UNIT COIN CHUTE DOOR PTV BASE CASHBOX DOOR GUN CONTROLLER MAIN CABLINET AC UNIT FIG. 4 TABLE 4 PTV PTV BASE BILLBOARD MAIN CABINET When assembled Downloaded from www.Manualslib.com manuals search engine Width × Depth × Height 88.19 in × 21.9 in × 65.7 in 47.2 in × 24.4 in × 12.2 in 46.06 in × 16.14 in × 15.16 in 44.9 in × 42.91 in × 39.76 in 47.24 in × 66.14 in × 67.8 in 9 Weight 220.4 lb 57.3 lb 39.68 lb 216.05 lb 557.77 lb www.sauservice.com 5. ACCESSORIES When transporting the machine, make sure that the following parts are supplied. TABLE 5 a ACCESSORIES DESCRIPTION Part No.(Qty.) Note KEY MASTER 220-5576 (2) For opening/closing the doors OWNERS MANUAL 4201-6831-01 Figures KEY (2) For the CASHBOX DOOR NOTE: Parts not labeled with part numbers are as yet unregistered or cannot be registered. Be sure to handle all parts with care, as some parts are not available for purchase separately. The Keys are inside the Coin Chute Door at the time of shipment from the factory. TOSHIBA 200-5536 (1) Remote Controller used for adjustment of the projector. See Section 12. TEST MODE WRITING R G B POSITION ADJUST CARTON BOX 601-11219-01 (1) Used for transporting the Game Board. See FIG. 5 a. P SET PIC-ADJ RESET L-WRENCH 540-0043-91 (1) SELECT The Remote Controller is attached to the Projector at the time of shipment. www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 10 HOW TO USE THE CHIHIRO BOARD CARTON BOX STOP IMPORTANT! Replacement or repair of the Game Board (Chihiro) for this product should be undertaken at the appropriate repair center. Be sure to follow the speciﬁcations below when requesting repairs/sending the board to the repair center. Not following the speciﬁcations may result in the board not being accepted or in extra charges being made. ● Put the game board in the carton box as is. Do not carry out any disassembly or part removal other than that speciﬁed. ● Follow the procedure and instructions regarding direction below when placing the Game Board in the carton box. ● When packing the game board with the Media Board attached, do not remove the Key Chip. ● When packing the game board with the Media Board detached, be sure to include the AVIP Cable. ● When packing, attach the accessory stickers in the speciﬁed places on the Game Board and carton box. INSTRUCTIONS ● Wrap the Chihiro Board in a plastic bag. ● Place it on top of the bottom surface cushioning material. Turn the Filter Board to face the side with the three honeycomb buffers. Placing it in the opposite direction may cause damage to the Filter Board. ● Insert corrugated cardboard into the space between the lateral honeycomb buffers of the bottom surface cushioning material and stow the AVIP cable inside. ● Place the Chihiro Board wrapped in the bottom surface cushioning material into the carton box. Use the handles on the bottom surface cushioning material. ● Place the upper surface cushioning material on top of the Chihiro Board. Be sure to align it in the right direction, as it will not ﬁt otherwise. ● Close the top of the carton box and seal it tightly with adhesive tape. Downloaded from www.Manualslib.com manuals search engine 11 www.sauservice.com FIG. 5 a FIG. 5 b www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 12 The following Table 5b lists the parts that had been separately packed when the product was shipped from the factory but are necessary when you use the product. These parts will be mounted on the product when installing and assembling it. TABLE 5 b GD SOFT KIT CTF KEY CHIP (1) See 6 of Section 6. CUSHION SPONGE 601-11137 (1) GD-ROM Disc Protector GD SOFT CTF See 6 of Section 6. NOTE: When you order the GD-ROM disc only, specify the part number 610-0652-0012 (GD SOFT CTF). Downloaded from www.Manualslib.com manuals search engine 13 www.sauservice.com The following Table 5c lists the parts that are separately marketed but are necessary when booting this product's software. When having unpacked the shipping crate, make sure that all the parts in this Table 5c are in the crate. If not so, contact where you have obtained the product. TABLE 5 c (XKT-0833 : GD-ROM DRIVE KIT) GD-ROM DRIVE CARTON BOX (1) Used for transporting the GD-ROM DRIVE. See FIG. 5 d. 123 GD-ROM DRIVE 610-0617 (1) 610-0617-01 Device that loads the software in a GD-ROM disc. See 6 of Section 6. This carton box is a standard accessory of the GD-ROM drive. If you want to obtain the carton box itself separately, specify the part number 601-11031. www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 14 HOW TO USE THE CARTON BOX (GD-ROM DRIVE) STOP IMPORTANT! When you want to order for replacing or repairing service of the GD-ROM drive that is used by the product, pack it in a carton box as instructed below, and then deliver the carton box to a service agent. If you do not observe the instruction, your order may not be accepted or may be charged additionally. If you handle the GD-ROM drive differently from the following instructions, its components may be damaged. ● Contain the GD-ROM drive in a dedicated carton box. Do not disassemble it or remove any part from it unless otherwise instructed. ● Before containing the GD-ROM drive in a dedicated carton box, attach the GDROM drive lid (DISC LID) onto the drive and ﬁx the lid with a screw. ● Before containing the GD-ROM drive in a dedicated carton box, remove the GDROM disc from the drive. Do not attempt to move the GD-ROM drive with a GDROM disc inside. ● Before containing the GD-ROM drive in a dedicated carton box, remove the GDROM drive bracket. Carefully keep the GD-ROM drive bracket and the 4 set screws, because they will be reused. ● When inserting the GD-ROM drive into a dedicated carton box, be careful about an inserting direction as illustrated below. ● The packing materials in a carton box are used as a cushion. Use them always when inserting the GD-ROM drive into a dedicated carton box. Do not bend them. Remove the GD drive bracket. FIG. 5 c Downloaded from www.Manualslib.com manuals search engine 15 www.sauservice.com 6. ASSEMBLY AND INSTALLATION WARNING! CAUTION! ● Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. ● Perform assembling as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per speciﬁed performance. ● When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage. ● Ensure that connectors are accurately connected. Incomplete connections can cause electric shock hazard. ● Be careful not to damage the wires. Damaged wires may cause electric shock or short circuit or present a ﬁre risk. ● Do not carelessly push the PTV. Pushing the PTV carelessly can cause the PTV to fall down. ● This work should be performed by the site maintenance individual or other skilled professional. Performing work by non-technical personnel can cause a severe accident such as electric shock. Failing to comply with this instruction can cause a severe accident such as electric shock to the player during operation. ● Provide sufﬁcient space so that assembling can be performed. Performing work in places with narrow space or low ceiling may cause an accident and assembly work to be difﬁcult. ● To perform work safely and avoid serious accident such as the cabinet's falling down, do not perform work in places where step-like grade differences, a ditch, or slope exist. ● Do not use this product with connectors other than those that were connected and used with the Game Board at the time of shipping. Do not carelessly connect wires to connectors that were not used at the time of shipping, as this may cause overheating, smoke or ﬁre damage. ● When handling plastic parts, use care. Do not give a shock or apply excessive load to the ﬂuorescent lamps and plastic parts. Failure to observe this can cause parts damage, resulting in injury due to fragments, cracks and broken pieces. ● To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents. ● Make sure that the GD cable connector is inserted parallel to the plug. Improper insertion may cause damage to the connector and present a ﬁre risk. www.sauservice.com Downloaded from www.Manualslib.com manuals search engine 16 When carrying out the assembling and installation, follow the following 9-item sequence. 1 ASSEMBLING THE BILLBOARD 2 ASSEMBLING THE PTV 3 ASSEMBLING THE CABINET 4 SECURING IN PLACE(ADJUSTER TUNING) 5 ATTACHING THE FLUORESCENT LIGHTS AND LAMPS 6 INSTALLING THE GD-ROM DRIVE(SETTING THE GD-ROM DISC) 7 POWER SUPPLY AND EARTH CONNECTION 8 TURNING THE POWER ON 9 ASSEMBLY CHECK The master key (accessories) in addition to the tools such as a Phillips type screwdriver, wrench, socket wrench and Ratchet Handle are required for the assembly work. Phillips type screwdriver (for screw) WRENCH (for hexagon bolt) SOCKET WRENCH, (for hexagon bolt) RATCHET HANDLE KEY MASTER L-WRENCH (3mm L-shaped hex wrench, included) Downloaded from www.Manualslib.com manuals search engine 17 www.sauservice.com 1 ASSEMBLING THE BILLBOARD ● Undo the 2 truss screws, and remove the pop bracket. POP BRACKET TRUSS SCREW (2), black M4×8 PHOTO 6. 1 a ● Undo the 3 truss screws, and remove the pop holder. TRUSS SCREW (3), black M4×8 POP HOLDER PHOTO 6. 1 b ● Attach the billboard pop by ﬁ